Sash Window Locks With Key

Sash windows can be difficult to secure. The basic centre catch used on most sash windows can easily be knocked open with a knife or screwdriver.

There are many ways to increase security while maintaining the traditional appearance of a timber sash window. Some of the most discreet options are opening restrictors, barrel fasteners and Brighton sash bolts.

Sash stops

If you have an old wooden sash window framed sliding sash window then installing a security lock may be a great solution to prevent children from opening the windows and climbing in. It's a relatively easy D.I.Y project that you can do on your own and the best part is that they are cheap.

There are many options for sash windows that are locked, but we would recommend the Migstop restrictor made by Mighton. This spring-loaded device can be shut or opened using the key. It will also stop the window from moving further than a preset point, which is perfect when you have children.

To put the fastener in place begin by closing and locking the window. Mark the position of the hole with pencil on both sides of the frame, and then drill the holes. Once the holes are drilled and the frame is set, you can install the fastener in place and screw it in using the screws supplied. You should also test the fastener to make sure it can be closed and opened quickly and does not have any catch that sticks out.

sash windows near me stops are fitted to the upper sash to prevent the sashes from sliding over each one. They are not noticeable and easy to install, but they only work if they are fitted to the right position within the window. For added security you can also fit sash bolts which are more difficult to remove, however they require an ignition key to operate them.

The bolts are inserted into the top and bottom of the upper sash, preventing them from being loosened. These bolts are available in two different designs: protruding bolts that can only be removed by a special tool, or pick bolts which are able to be removed. They are able to be used with sash stoppers that are fitted to the frame, allowing an opening of 100mm, which allows you to let fresh air in without risking burglary.

Another option is to put in frames to frame locks that is located at the bottom of the lower sash, and at the top of the upper sash. They can be opened using the use of a key and are safer than traditional sash stoppers. However, they may not be suitable to those with disabilities or who are unable to operate traditional windows in sash.

Sash bolts

One of the simplest and cheapest methods to secure your sash windows by using a sash bolt. These are fitted between the outer and inner frames to prevent the sash from being pulled open. They are simple to install and are available in a variety of sizes that fit the majority of sash windows. It is recommended to install them in pairs to provide the most protection. These are an excellent alternative to the traditional catch that holds the sashes, however, you should still pin the windows for maximum security.

A sash-window bolt is constructed out of brass and has an opening that is drilled into the lower sash. A bolt is then screwed into this and secured with keys. This effectively affixes the two sashes, meaning they cannot be opened without the key. They do not stop the window from sliding, so you'll need a lever or pull cord to open it.

A frame-to-frame lock is a different kind of sash lock. The lock is located on the top of the lower sash inside and locks with an inbolt that is pushed in. It can be operated by keys or auto. It offers excellent security. It is also relatively easy and a great choice for older upvc sash windows.

It's important to keep your sash windows well maintained to ensure that they function effectively. Wood decay can cause locks and fasteners to break or become loose therefore it is essential to fix them as soon as you notice a problem. You can seek help from a sash windows service by sealing your windows and repainting them to avoid decay of the wood. They can also fix drafts to improve your home's energy efficient.

Surface-mounted locks

They are fitted to frames for windows with sash and prevent it from opening too wide. They don't function as a handle, but restrict the window by connecting to the frame using bolts. They can be used on either double or single-hung vertical sliding sash windows and are perfect for second floor windows. However, they're not suitable for first-floor windows as burglars could still open the window from outside.

There are a variety of styles and finishes. Some are protruding bolts that can be removed with a key and others are hidden within the frame. They're more expensive, however they provide better security and could be more effective in deterring intruders. However, they aren't as simple to install as sash bolts and require specialized tools.

It's crucial to select a reputable company for your installation project or replacement. Make sure you check the credentials of a company's, reviews, social media and certifications to ensure that you are receiving the best possible service. It is also important to compare quotes from different companies to compare service and prices. It is crucial to test the new fasteners after they have been installed to ensure that they function according to their intended purpose and are secure.

Another option is to choose locks that are child-proof for windows that have sash. These locks can be used to stop children from opening windows and are available in a variety of colors and sizes. Some levers rotate around a quarter-circle to locate a catch mounted at the lower window frame. This type of fastener is usually hung high enough that a child cannot reach it with their hands.

While window screens with locks may make you feel safer however they aren't enough to deter determined burglars. These locks are not designed to stop children from falling through a window and shouldn't be relied upon to prevent this. Instead, you should use windows that allow ventilation but is hard to open without a key. These kinds of sash window locks are also referred to as dual screw locks. They include one bolt that slots into an opening in the inside of the sash and another that slots into a hole within the frame of the casement. They are easy-to-install and offer more security than sashstops.

Keyed locks on sash

Traditional sash windows might seem easy for burglars to take over however, you can take steps to stop them from happening. The best way to begin is to have them inspected and repaired by a professional who will assure that they're functioning properly and have been fitted with security features. This makes it more difficult for criminals, and they might abandon their efforts and pick another target.

Another option is to put sash stoppers in the frame, as these will prevent the replace window sashes from opening past a certain point. They can be put on either side of the frame, and are available in both protruding and non-protruding styles. They're simple to install and are made of zinc diecast and have a white-painted finish. They are also very robust and can be locked with keys.

In addition to sash stops, you can also add sash bolts to your frame. Bolts are used to go through the inner sash hole and into the slot on the exterior frame. This prevents the sash being pulled open. They can be fitted in pairs to provide maximum security.

These windows will not only boost your energy efficiency, but also increase the security of your sash window. This is because they stop the sash from being pulled out, which reduces the chance of draughts and loss of heat. These bolts are available in both protruding and non-protruding forms, and you can buy them individually or in sets.

It is not wise to depend on these security measures alone as criminals are always able to come up with ways to get around them. For this reason, it is essential to install an adequate core door and make sure that your locks are working correctly. This will stop criminals from entering your home and improve your peace of mind. When installing new sash locks, it is best to leave them to professionals to ensure they're installed correctly and do not interfere with the operation of your windows. To ensure your security it is also possible to look for a business that has a good reputation and social media.