How to Programming a Subaru Key Fob at Home

Depending on how old your Subaru is, you may need to have your key fob programmed by an auto locksmith. This is done by connecting a computer-based programming machine to your car.

To program your Subaru, start by unlocking the driver's door with the door button control, then close it. You will hear the chime, and see the dome lights flashing in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are several ways to program your key fob. First, you must be aware of the type of key fob you have. This can be done by studying the shape of the key fob or by listening to your car for a chime.

Once you have the necessary information, you can start the process of programming your key fob at home. To do this, you will require a key made of metal and a flathead screwdriver. The key fob can be opened by twisting. Push the key's metal part into the case and let go of the battery by pressing the tabs holding it in place. Replace the battery with a fresh one, and then put the key fob case back together.

Step 2: Disconnect the key fob case

It is recommended to replace the battery in key fobs if they are not working. In some cases buttons on the key fob may be damaged. If you notice the metal contacts on the button have come loose You can try applying solder back to them in order to make them function again.

Make sure that you shut off your ignition and close your doors before you begin. Close the driver's door and press your door button 10 times in rapid succession. Then, you should hear the instrument panel chime, and your dome light will flash. This indicates that you're ready to move on.

Step 3: Insert the fob for the key into the ignition

Many online articles will show you how much does a subaru key fob cost to program your brand new or Replacement Subaru Key subaru new key keyfob at home. However, most of them do not provide precise instructions. Programming an electronic key is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with all doors closed and the engine turned off. Use the door button to unlock all doors. Close and open the driver's door two more times. Inject and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system should chirp to confirm that the settings have changed.

Step 4 Step 4: Switch on the ignition

Before proceeding with this method of key fob programming it is important to remember that this method only works with a functioning key already. If you don't then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once your key has been programmed, you should be able start your car in less than five seconds. Begin by closing all doors and turning off the engine. Then, sit in the driver's seat and unlock all doors with the door button control. Insert the key in the ignition and turn it back to the first position. The electrical systems will be activated, however, the engine remains off. Repeat this process ten times.

Step 5 5. Unlock the Driver's Door

replacement subaru key has a broad selection of luxury cars that come with key fobs that lock and unlock doors and start the car and defrost the windows. However, there are times when these devices do not function properly.

Find a locksmith or dealer to fix the problem. This will solve the issue and ensure that your car is safe.

To accomplish this, open the driver's door, then close it. Then, insert the ignition key in and change it to the off position. Then, return it to the off position. Do this as fast as you can 10 times. After tenth attempt, you will hear a chime.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

If you are looking to replace the battery inside the lost subaru key fob key fob, the process is easy. First, open the exterior fob casing. Then, use a flathead screwdriver to pry open the interior case and then remove the battery.

After removing the battery and replacing it with the new one. Close the case. Then, you can sit in the driver's chair and unlock all the doors using the door button control. After that, put the key in the ignition and turn it so that the electrical systems are powered on but the engine is off. Repeat this 10 times in a line until you hear a chime sound on the instrument panel. This will put the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

For certain owners, the irritating noise that occurs when locking and unlocking a Subaru key fob from outside the vehicle can become distracting. In some cases the chirp can be disabled by opening and closing the doors as well as a double-click of the lock button on the key fob.

Switch the ignition off and close all doors and the lid for the fuel-filler. For 10 seconds you need to press and hold the lock button on the key fob. The instrument panel emits a sound when this is accomplished. The chime signals that the lid of the fuel filler and door are locked. It is possible to alter the setting to make doors lock automatically without the need to press a switch.

Step 8: Enter the 8-Digit Transmitter Number.

Keep the first 8 numbers in your head. Then, get into your driver's seat. Close all the doors and turn the ignition to the first position (towards on). After 10 turns, your instrument panel should begin to sound at least once.

Next, open the case for the key fob and look for the circuit board that controls the transmitter. There are usually two or three sets of numbers (8-digits) on the circuit board. Take note of the first number sequence and follow the instructions in this guide to register the code on the system of your vehicle. This procedure may require a visit to the dealer for older models.