Window Repairs

Window repairs can save homeowners money and help keep their homes warm. upvc window repair replacements may be required in the event of serious damage such as broken glass, or a window frame that has been smashed.

Many other problems can be solved to prolong the lifespan of windows. Common issues include:

Cracked or broken panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree's branch blown by strong winds, cracked window glass isn't just unattractive but can lead to more expensive electricity bills because the broken pieces allow cold air into your home. Luckily, it's typically easy to repair windows that have damaged panes.

Start by carefully removing glass with gloves and safety sunglasses. You may need to use an utility knife to break loose the old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the frame's wood using a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is waterproof to the frame's perimeter. This will stop water from getting in through the crack, which could cause further damage to the frame and the glass.

A bad crack in double-paned glass could affect the gas between the panes, making your windows less efficient in insulating. If the crack is severe enough that it compromises the strength of the upvc window repair near me, or if the pane inside is not there you might need to call a professional.

Cracks caused by thermal stress can occur when there's an extreme difference in temperatures between the inside and outside of your home, which causes the glass to expand or contract. If the cracks are on two sides of a glass, it is best to replace it instead of attempt to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready for replacement. It will also keep out bugs and cold wind. You can also cut an area of nylon stocking or tarp that's large enough to cover the crack, and glue it in place with duct tape. This isn't a long-term solution however it can be useful in a pinch and keeps insects and cold air from entering your home. If you notice cracks on your older windows it is recommended to contact the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a frequent issue with windows. It can affect the appearance of a home and also pose danger to your safety. However, it is possible to repair wood that has rot. It is first necessary to determine the root of the wood decay. Look for leaks on the roof and other areas that water may get into the wood.

You'll then have to remove the rotten parts of the window frame. This can be done using an axe, a claw hammer, or rasp. After removing the rotten wood, you'll need to replace it with new wood. It is recommended to make use of pre-treated wood for this project since it is more resistant to rot. If you are unable replace the wood that has been damaged then you can use filler or wood hardener to repair the damaged area. This kind of product can be available at most hardware stores. To get the best results, follow the instructions on the label.

After you have repaired the damaged areas of the window sill, it is important that you protect the area. Apply a water-resistant sealant the wood. A product like Sikkens is an excellent option for this job.

Use a two-part epoxy to safeguard the wood from further damage. This product is easy to apply and leaves a beautiful finish. However, it's important to follow the application instructions on the label. Once the epoxy filler has dried it is possible to sand the wood's surface. Start with a rough sandpaper and then move on to more smoother grades.

You do not want to expose the damaged area to more moisture. It is a good idea that's why you should cover the repaired surface with an oil-based prime which will shield it from moisture. After that, you can apply waterproof wood sealant.

The W won't let you open

There are a variety of reasons a window won't open. The house could have settled, or the wood frames may have warped in wet weather. Someone might have also nailed them shut for security. With a little patience and the right tools you can unlock most stuck windows.

One of the most frequent reasons for windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime builds up over time on the sliding tracks, hinges and locks. In addition, metal hardware is prone to be rusty when it comes in contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease will help prevent the oxidation process and ensure that your window is operating properly.

The pulleys that raise or lower the window may become loose, or even break. These components can be weakened and obstructed when they are placed at least two floors above the ground.

If you have difficulty opening a door, try using a pry-bar to gently open the door. Place a block on the frame of the window repairs to give the pry bar more leverage. Be careful not to harm the wood or the window. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A faulty spring can also be the reason for windows that aren't able to raise or lower. You will need to consult the owner's manual for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they still won’t open, then it's probably time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let the windows in your home go from functional to useless. A window that isn’t properly shut could expose your home to burglary and water damages. Contact us to learn more about our windows replacement services and products today!